EN
5
Using remote control for other equipment (RC 311TAM1)
This remote control is supplied with some TV sets models, it can operate other equipment, such as video recorders, DVD players,
satellite receivers or hi-fi systems.This page provides information concerning the remote control’s use with these other types of
equipment.
Video recorder DVD player
Press VCR button Press DVD button
To display the main
menu.
To display the main
menu.
To directly access
channels or enter
numeric values.
To enter numeric values
or select options in
menus.
Changement de chaîne
On/Standby
Sélection de l’entrée AV
Rewind
Play
Fast forward
Stop
Pause
Rewind
Play
Fast forward
Stop
Pause
Vertical scrolling in menus
Horizontal scrolling in menus
To confirm an action.
To close a menu.
Only makes of apparatus of the THOMSON group benefit from the actions of all the
buttons
Programming the remote control
Automatic code search
This method can be used to automatically find the
most appropriate code for your appliance.
1. Switch on the appliance you wish to use the
remote control with.
2. Press the relevant button for this appliance on the
remote control, and while holding this button
down, press the standby button until the
remote control light comes on. Release the two
buttons.
3. Point the remote control at the appliance and
press PLAY.Wait until the light stops flashing.If the
appliance has not gone into standby mode after
five seconds, press the PLAY button again to
continue the search for the next set of codes.
Repeat this operation until the appliance goes into
standby mode.There are 20 sets of codes.
4. When the appliance goes into standby mode, press
the standby button on the front to switch it on
again.Then press the REV button to put it back in
standby mode, and if necessary, keep pressing until
the appliance goes into standby.
5. Press the STOP button and hold it down until the
remote control light goes off.
Note: you can cancel the programming operation at any
time by pressing the EXIT button.
Manual programming
This method involves carrying out a manual search for the codes to be used for controlling your other appliances.
1. Switch on the appliance you wish to use the remote control with.
2. Press the relevant button for this appliance on the remote control, and while holding this button down, enter one of the
codes relevant to your make of appliance (there is a list of codes at the end of this manual). If the remote
control light flashes you have entered the wrong code or it is not possible to program the remote control.
3. Point the remote control at the appliance and press the relevant button (VCR or DVD). Press the standby button.
If the appliance does not go into standby mode, try another code.
Depending on the year of manufacture and the type of appliance, some functions may not be available.
Certain codes may cover more functions than others.Test the functions you can control and, if appropriate, try other codes.
Note here the code(s) which work best.
When you change the remote control’s batteries, remember to reprogram it.
VCR
DVD/LD
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals